With the promotion of coal to electricity, many electric heating products begin to be concerned, among which electromagnetic heating furnace is one of the most concerned ones. Many people may think that the electromagnetic heating boiler consumes a lot of electricity, in fact, because they do not have a thorough understanding of the working mode of the electromagnetic heating furnace. The following small edition for you to explain how to use the electromagnetic heating furnace to save electricity.
Keep the room warm
安徽快3开奖结果 The main factors of heating energy consumption are the heat preservation of building maintenance, whether the neighboring units are heated, the comprehensive thermal efficiency of products and the heating mode。 This is why no product can give an accurate energy consumption。 We suggest that users, if your house does not have heat preservation treatment, it is better to do heat preservation treatment on their own, especially for newly purchased new houses that are not decorated, they must consider heat preservation treatment when decorating。 The house cost of 100 square meters is only a few thousand yuan, which is a very small expense compared with the regular decoration of tens of thousands or even hundreds of thousands, but the effect of heating energy conservation in winter and cooling energy conservation in summer is very good The difference is several times。 The cost of heat preservation treatment can be saved in 2-3 years, but the effect of energy conservation can be enjoyed for decades。
Reasonable selection of power of electromagnetic heating furnace
Different house structure, room height, lighting area, room location, its heat load is different。 The power selection of electric heating furnace must be calculated according to the heating load of the heating room。 The power of the electromagnetic heating furnace often used by users can not meet the requirements of the room heat load, which not only causes the electromagnetic heating furnace not to stop or rarely to stop, but also can not reach the ideal heating temperature。
Reasonable setting of upper limit temperature
The working principle of electromagnetic heating furnace is intermittent operation, that is, when the water supply temperature is lower than the upper limit temperature, the electromagnetic heating furnace is in the heating state, when the water supply temperature reaches the upper limit temperature, the electromagnetic heating furnace is in the shutdown and heat preservation state。 In the coldest days of the heating period, the heating value provided by the electromagnetic heating furnace just meets or is less than the heat load required by the room。 If the upper limit temperature value of the electromagnetic heating furnace is set too high, the actual water supply temperature of the electromagnetic heating furnace will be difficult to reach the upper limit temperature, so the electromagnetic heating furnace will be in a 24-hour heating state。
Reasonable adjustment of temperature difference between supply and return water of electromagnetic heating furnace
The current hot water heating system of electromagnetic heating furnace can be divided into three main forms。 The temperature difference between the supply and return water is as follows: in the low-temperature hot water radiator heating system, the ideal temperature difference between the supply and return water of electromagnetic boiler should be 20-25 ℃; in the low-temperature hot water floor radiation heating system, the ideal temperature difference between the supply and return water of electromagnetic boiler should be 5-10 ℃; in the fan coil heating system, the ideal temperature difference between the supply and return water should be 5-10 ℃ The temperature difference between the supply and return water of the electromagnetic boiler should be 4-5 ℃。 Proper adjustment of the temperature difference between the supply and return water can improve the heat transfer coefficient, increase the efficiency and greatly reduce the operation cost of the whole heating period。
Reasonable setting of control temperature in day and night
Now many of them are office workers, no one is at home during the day. At this time, we can adjust the heating temperature of the electromagnetic heating furnace to the antifreeze mode (at this time, the electromagnetic boiler is in the antifreeze state, the water temperature in the heater is kept between 5-8 degrees, and the overall space temperature in the room is about 0-5 degrees). After work, adjust the heating gear of the boiler to the temperature you need, which can effectively save energy Source, the heating is faster.
Electromagnetic induction boiler can set three working periods。 When we fall asleep at night, we don't need very high heating temperature。 We can lower the heating temperature properly, which can save the operation cost of heating period。
Reasonable selection of radiator
Features of copper aluminum composite radiator: copper water channel is anticorrosive, aluminum fins have good heat dissipation, strong combination, and anticorrosive effect is good. Copper aluminum composite radiator has high pressure bearing capacity, corrosion resistance, good heat dissipation effect, not limited by the heating system, and its price is above the average. It is suitable for electromagnetic heating furnace.
Shenzhen Huaneng electronic is a professional in the research and manufacture of electromagnetic heater. The company has many technical patents and test certificates. It is also a national high-tech enterprise, with reliable strength. Welcome new and old customers to understand and consult.